Collections

rw-fb-01  /  Cookie Box

Slim Vent-Clip Car Cookie Case - Red

Slim Vent-Clip Car Cookie Case - Red

One-piece PP cookie case that clips onto a 3-8 mm air vent louvre and holds 2-3 cookies. Translucent 1.2 mm wall, one-hand lid, logo in the mould.

SpecificationDetail
MaterialFood-contact PP, test report on request
Wall1.2 mm; living hinge rated for 1,000,000 cycles
Size95 × 70 × 30 mm
Weight48 g
MountVent clip, fits 3-8 mm louvres
Capacity2-3 cookies, 60 mm dia.
MOQ500 pcs per colour
BrandingTone-on-tone embossed logo in mould, lid print, custom packaging

Minimums, tooling and lead time depend on the item and the decoration — send your quantity and we will quote against it.

A cookie case that lives on the air vent

Body, lid and clip leave the mould as one part — no spring to rust, no magnet to fall out, no second component to fit, so there are fewer failure modes and a landed cost that stops moving once tooling is paid.

The 8 mm clear opening takes any louvre from 3 to 8 mm; an inner rib 4 mm behind the opening stops the case sliding in too far and pins it against the louvre edge. One millimetre of compression per side is absorbed by the PP itself, so there is still grip on the ten-thousandth open and close.

Tinted translucent PP at 40–60% light transmission: the cookies read through the wall, so the case sells the snack on the shelf and again on the dashboard — no printed window, no sleeve, no shrink film.

A 1 mm front lip with a 0.3–0.4 mm catch lets a thumb flip the lid open at a red light; it swings clear and stays open while the other hand takes a cookie, and closing is one push. The 1.2 mm wall and shallow tray keep a stack from sliding when the car brakes, and the lid closes to a uniform gap so crumbs stay in the box.

The hinge is thinned to 0.6–0.8 mm across the fold, thickened 0.3 mm at the root and radiused at both ends — the one place that wears is the one place dimensioned for a million opens.

The HOLYBULL wordmark is embossed tone-on-tone in the mould at about a quarter of the lid width: no label, no ink, no second process, no adhesive to age.

Five lines for the quotation sheet

  • One-piece PP, nothing to assemble
  • Clips 3–8 mm vent louvres, no spring
  • Holds 2–3 cookies, 60 mm diameter
  • 1.2 mm wall, 48 g per unit
  • Hinge designed for 1,000,000 cycles

Send a brief on rw-fb-01

Quantity, colour, print and target price are enough to start. We answer with a cost, a tooling position and a sampling date.

Goes to the sales desk inbox and into the admin panel.