Collections

rw-fb-54  /  Nut Shell Separator Bowl

Fox-Shaped Nut Bowl with Shell Storage - Terracotta

Fox-Shaped Nut Bowl with Shell Storage - Terracotta

3-piece PP nut bowl: translucent tray on top, 480 ml shell bowl underneath, and a fox figure whose open mouth drops walnut shells straight down. 150 mm dia., 1.8 mm wall.

SpecificationDetail
MaterialFood-contact PP, test report on request
Wall1.8 mm, uniform across the set
Size150 mm dia. × H105 mm with the figure fitted
Top tray150 mm dia. × H30 mm, 350 ml, rim overhangs the bowl
Lower bowl150 mm dia. × H60 mm, 480 ml, usable on its own
Mouth cavity40 mm dia. through-cavity, 0.5° draft, outlet about 55 mm above the bowl base
Weightapprox. 190 g per set, confirmed after tooling
MOQ500 sets per colour; tray and bowl tools are shared
BrandingEmbossed or printed logo on the tray, custom figure and colourway

Minimums, tooling and lead time depend on the item and the decoration — send your quantity and we will quote against it.

A fox that eats the shells

The open mouth is not decoration. It is the entry of a 40 mm vertical cavity that passes through the tray centre and stops about 55 mm above the base of the lower bowl, so a cracked shell drops out of sight instead of piling up at the lips.

The cavity keeps one diameter down its full length with a 0.5° draft: shells slide through without catching, and a rinse reaches the bottom without leaving a hidden corner.

Three pieces come apart without tools — tray, bowl and fox figure. Empty it, rinse it, change the colourway, or run the lower bowl on its own as a 480 ml snack bowl.

The tray is a 30 mm basin rather than a flat plate, so nuts sit below the rim and stay put when the set is lifted. Its rim rests on the bowl mouth and leaves a slim edge of the bowl showing: the stack reads as two layers, not a lid, and does not slide.

The figure is a separate mould. A new character or colourway can be developed without touching the bowl tooling, and the tray takes an embossed or printed logo for retail and promotional programmes.

Five lines for the quotation sheet

  • 3-piece PP set: tray, bowl, detachable figure
  • 150 mm dia. × H105 mm, approx. 190 g
  • 350 ml top tray over a 480 ml shell bowl
  • 1.8 mm wall, food-contact PP
  • Figure and colourway customisable, logo on the tray

Send a brief on rw-fb-54

Quantity, colour, print and target price are enough to start. We answer with a cost, a tooling position and a sampling date.

Goes to the sales desk inbox and into the admin panel.